2023 Komatsu FH35/50-2 FH50-2
- Year 2023
- Make Komatsu
- Model FH35/50-2
2023 Komatsu FH35/50-2 FH50-2
Construction strongAre you burning out your forklift fleet by constantly shuttling 8k-11k loads? Maybe you need forklifts designed to handle such heavy duty with ease. The FH series integrates components and technology proven over many years in Komatsu’s wheel loaders, bulldozers and excavators, so you know they’re built tough. The hydrostatic drive system gives them the ability to cycle through operations with virtually no wear on drive and brake components, meaning more uptime and lower cost of ownership than traditional torque converter systems, even in the most demanding applications.
Features may include:
Highly efficient proprietary diesel technology- The FH family diesel engines are EPA certified Tier 4 Final, designed to reduce fuel use and significantly reduce exhaust particulate matter. They incorporate Komatsu proprietary technologies like Komatsu Diesel Oxidation Catalyst, variable flow turbocharger and much more.
- Featuring a variable displacement pump with closed-center load sensing system, the FH family allows for controlled fluid flow in the hydraulic system while lifting, resulting in no engine revving and reduced fuel consumption.
- The highly efficient, electronically controlled hydrostatic transmission (HST) hydraulic pump and motor system increases operator control, minimizes power transmission loss, boosts fuel savings and reduces environmental impact
Engine
Engine Manufacturer
Komatsu SAA4D95LE-6-C
Engine Power
Rated Output (SAE Net): 66.4 HP
Engine Torque
Maximum Torque (SAE Net): 212 lbs.-ft. @ 1,400 rpm
Displacement
199 in3
Cylinder Liners
4
Fuel System
Fuel Type
Diesel
Drivetrain
Transmission
Hydrostatic
Steering
FHPS
Brakes
Brake System Type
Foot/Hydraulic
Parking Brake
Hand/Mechanical
Wheels & Tires
Tires, Front Specification
Type: Pneumatic | 300-15-18PR(I)
Tires, Rear Specification
Type: Pneumatic | 7.00-12-12PR(I)
Tire Tread Thickness, Front
48.2 in
Tire Tread Thickness, Rear
44.1 in
Wheels
Number of Wheels, Front/Rear: 2x/2
Operational
Operating Speed
Lowering Speed, Loaded/Unloaded: 98.4 fpm | Travel Speed, Loaded/Unloaded: 14 mph 14.6 mph | Lifting Speed, Loaded/Unloaded: 96.5 fpm 99.4 fpm
Operating Conditions
Maximum Gradeability: 28% | Maximum Drawbar Pull: 7,644 lb
Hydraulics
Maximum Pressure
2,988 PSI (20.6 Mpa)
Dimensions
Dimensions
Fork Carriage Class: 46.9 in| Forks - Thickness: 2.2 in | Standard Free Lift: 6.9 in | Tilting Angle, Forward/Backward: 6 / 12 deg | Rated Load Center: 24 in | Load Distance, Front Axle to Fork Face: 24 in
Wheelbase
84.6 in
Height
Mast Lowered: 96.5 in | Extended: 178 in | Standard Lift: 130 in | Overhead Guard: 90.2 in
Length
with Standard Forks: 171.5 in | to Fork Face: 129.3 in | 42.1 in
Overall Width
at Drive Tires: 59.8 in
Width
5.9 in | Aisle L1000 x W1200 pallet: 189.6 in | L1200 x W800 pallet: 196.7 in
Ground Clearance
Under Mast: 5.5 in | Center of Wheelbase: 8.3 in
Turning Radius
Outside: 117.9 in
Capacities
Fuel Capacity
27.7 Gal
Cargo Capacity
Rated Capacity: 11,000 lb
Hydraulic Capacity
20.1 Gall
Axle Capacity, Front
Loaded: 23,578 lb | Unloaded: 6,614 lb
Axle Capacity, Rear
Loaded: 3,263 lb | Unloaded: 9,259 lb
Weights
Weight
Service: 15,873 lb
Features
Features
Operation Type: Sitting