2023 Komatsu FH35/50-2 FH45-2

2023 Komatsu FH35/50-2 FH45-2

Swipe to View More

  • Year 2023
  • Make Komatsu
  • Model FH35/50-2
2023 Komatsu FH35/50-2 FH45-2

2023 Komatsu FH35/50-2 FH45-2

2023 Komatsu FH35/50-2 FH45-2

Construction strong

Are you burning out your forklift fleet by constantly shuttling 8k-11k loads? Maybe you need forklifts designed to handle such heavy duty with ease. The FH series integrates components and technology proven over many years in Komatsu’s wheel loaders, bulldozers and excavators, so you know they’re built tough. The hydrostatic drive system gives them the ability to cycle through operations with virtually no wear on drive and brake components, meaning more uptime and lower cost of ownership than traditional torque converter systems, even in the most demanding applications.

Features may include:

Highly efficient proprietary diesel technology
  • The FH family diesel engines are EPA certified Tier 4 Final, designed to reduce fuel use and significantly reduce exhaust particulate matter. They incorporate Komatsu proprietary technologies like Komatsu Diesel Oxidation Catalyst, variable flow turbocharger and much more.
Makes engine revving unnecessary
  • Featuring a variable displacement pump with closed-center load sensing system, the FH family allows for controlled fluid flow in the hydraulic system while lifting, resulting in no engine revving and reduced fuel consumption.
Designed to lower operating costs
  • The highly efficient, electronically controlled hydrostatic transmission (HST) hydraulic pump and motor system increases operator control, minimizes power transmission loss, boosts fuel savings and reduces environmental impact

Engine

Engine Manufacturer Komatsu SAA4D95LE-6-C
Engine Power Rated Output (SAE Net): 66.4 HP
Engine Torque Maximum Torque (SAE Net): 212 lbs.-ft. @ 1,400 rpm
Displacement 199 in3
Cylinder Liners 4

Fuel System

Fuel Type Diesel

Drivetrain

Transmission Hydrostatic
Steering FHPS

Brakes

Brake System Type Foot/Hydraulic
Parking Brake Hand/Mechanical

Wheels & Tires

Tires, Front Specification Type: Pneumatic | 300-15-18PR(I)
Tires, Rear Specification Type: Pneumatic | 7.00-12-12PR(I)
Tire Tread Thickness, Front 48.2 in
Tire Tread Thickness, Rear 44.1 in
Wheels Number of Wheels, Front/Rear: 2x/2

Operational

Operating Speed Lowering Speed, Loaded/Unloaded: 98.4 fpm | Travel Speed, Loaded/Unloaded: 14 mph 14.6 mph | Lifting Speed, Loaded/Unloaded: 96.5 fpm 99.4 fpm
Operating Conditions Maximum Gradeability: 29% | Maximum Drawbar Pull: 7,644 lb

Hydraulics

Maximum Pressure 2,988 PSI (20.6 Mpa)

Dimensions

Dimensions Fork Carriage Class: 46.9 in| Forks - Thickness: 2.2 in | Standard Free Lift: 6.9 in | Tilting Angle, Forward/Backward: 6 / 12 deg | Rated Load Center: 24 in | Load Distance, Front Axle to Fork Face: 24 in
Wheelbase 84.6 in
Height Mast Lowered: 96.5 in | Extended: 178 in | Standard Lift: 130 in | Overhead Guard: 90.2 in
Length with Standard Forks: 171.5 in | to Fork Face: 129.3 in | 42.1 in
Overall Width at Drive Tires: 59.8 in
Width 5.9 in | Aisle L1000 x W1200 pallet: 188.2 in | L1200 x W800 pallet: 193.3 in
Ground Clearance Under Mast: 5.5 in | Center of Wheelbase: 8.3 in
Turning Radius Outside: 116.7 in

Capacities

Fuel Capacity 27.7 Gal
Cargo Capacity Rated Capacity: 10,000 lb
Hydraulic Capacity 20.1 Gall
Axle Capacity, Front Loaded: 21,925 lb | Unloaded: 6,504 lb
Axle Capacity, Rear Loaded: 3,031 lb | Unloaded: 8,477 lb

Weights

Weight Service: 14,980 lb

Features

Features Operation Type: Sitting

Product Photography