2024 Komatsu AX50 Series FG15HTU-20

Information

2024 Komatsu AX50 Series FG15HTU-20

Big power and performance in a small package

The AX50 is designed to move high volumes and big loads reliably. Integrating Komatsu’s 100-year history of rigorous engineering in mining and construction, it’s built for efficiency and productivity with operator comfort in mind.

Features may include:

Enhanced safety for employees and goods
  • The Komatsu Operator Presence System (KOPS) Plus, standard with AX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while the key is in the off position.
High-efficiency drivetrain
  • Our expertise in construction is behind the AX50’s full floating drivetrain. High torque delivered by a powerful engine is channeled through a heat dissipating aluminum transmission case and a rugged dust- and leak-resistant, double-seal U-joint design.
Advanced ergonomic design
  • Designed to improve operator comfort and reduce fatigue, the Komatsu Komfort Zone is a dual floating structure: dampening mounts protect the frame from engine vibration; additional mounts isolate your operators from the frame. Sealed floorboard reduces engine noise and heat.
Angled ports to manage exhaust and dust
  • Hot engine air, dust and exhaust can affect operators over time. The AX50 series’ angled exhaust ports in the counterweight aim exhaust away while traveling in reverse. Exhaust vents low on the counterweight point away from the ground and don’t stir up dust.
Excellent sightlines front and rear
  • An unrestricted view of the fork tips and surroundings. The thoughtfully designed mast, console and low-profile dash provide you outstanding forward visibility. Upper corners of the counterweight are angled for clear sightlines in reverse.

Photos

Highlights

  • Chesapeake, Virginia
  • 2024
  • Komatsu
  • AX50 Series FG15HTU-20
  • Model: GK21
  • Powershift
  • Available
  • Forks: 4 in | Carriage: 41 in
  • Mast Height - Lowered: 85.5 in | Mast Height - Extended: 176 in | Maximum Fork: 128 in | overhead guard: 81.5 in

Specifications

  • 2024
  • Komatsu
  • AX50 Series
  • FG15HTU-20
  • Cushion Tire
  • Model: GK21
  • GCT
  • Rated Output (SAE Net): 54 HP @ 2,700 rpm
  • (SAE Net): 117 lbs.-ft. @ 1,600 rpm
  • 4
  • 126 in3
  • Power Type: LPG / Dual Fuel
  • FHPS
  • Powershift
  • Operation/Control: Foot / Hydraulic
  • Operation/Control: Hand / Mechanic
  • Type: Pneumatic | 6.5 - 10 - 10PR (I)
  • Type: Pneumatic | 5 - 8 - 8PR (I)
  • Number of Wheels, Front/Rear: 2x / 2
  • 35 in
  • 35.2 in
  • Operation Type: Sit-Down | Max. gradeability: 39%
  • Travel Speed, Forward, Loaded/Unloaded: 11.5 / 11.8 mph | Lifting Speed, Loaded/Unloaded (2-stage mast): 116 / 126 fpm | Lowering Speed, Loaded/Unloaded (2-stage mast): 98.4 / 108.3 fpm
  • Relief Pressure, Maximum: 2,650 psi
  • Load Distance From Center Axle (2 Stage): 15.4 in | Tilting Angle, 2-Stage (FV) Masts, Forward/Backward: 6 / 8 deg | Tilting Angle, 3-Stage (TFV) Masts, Forward/Backward: 6 / 5 deg | Forks, Thickness: 1.6 in | Right Angle Stacking Aisle: 92.4 in
  • 55.1 in
  • Mast Height - Lowered: 85.5 in | Mast Height - Extended: 176 in | Maximum Fork: 128 in | overhead guard: 81.5 in
  • Free Lift Height (2-stage std. mast): 5.5 in
  • with Standard Forks: 129.7 in | to Fork Face: 87.6 in | Forks: 42 in
  • at Drive Tires: 42.1 in
  • Forks: 4 in | Carriage: 41 in
  • Under Mast: 5.5 in | Center of Wheelbase: 5.1 in
  • 77 in
  • @ 24 in (600 mm) Load Center: 3,000 lbs.
  • Axle Loading, Loaded Front: 7,770 lbs | Axle Loading - Unloaded Front: 2,620 lbs.
  • Axle Loading, Loaded Rear: 1,170 lbs | Axle Loading - Unloaded Rear: 3,320 lbs.
  • Maximum Drawbar Pull, Loaded: 3,700 lbs.
  • 10.6 US gal
  • Service: 5,940 lbs.
  • Carriage ITA Class: II