2023 Komatsu AX50 Series FG15HTU-20
- Year 2023
- Make Komatsu
- Model AX50 Series
2023 Komatsu AX50 Series FG15HTU-20
2023 Komatsu AX50 Series FG15HTU-20
Big power and performance in a small packageThe AX50 is designed to move high volumes and big loads reliably. Integrating Komatsu’s 100-year history of rigorous engineering in mining and construction, it’s built for efficiency and productivity with operator comfort in mind.
Features may include:
Enhanced safety for employees and goods- The Komatsu Operator Presence System (KOPS) Plus, standard with AX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while the key is in the off position.
- Our expertise in construction is behind the AX50’s full floating drivetrain. High torque delivered by a powerful engine is channeled through a heat dissipating aluminum transmission case and a rugged dust- and leak-resistant, double-seal U-joint design.
- Designed to improve operator comfort and reduce fatigue, the Komatsu Komfort Zone is a dual floating structure: dampening mounts protect the frame from engine vibration; additional mounts isolate your operators from the frame. Sealed floorboard reduces engine noise and heat.
Engine
Engine Manufacturer
GCT / GK21
Engine Power
Rated Output (SAE Net): 54 HP @ 2,700 rpm
Engine Torque
Maximum Torque (SAE Net): 117 lbs.-ft. @ 1,600 rpm
Displacement
126 in3
Cylinder Liners
4
Fuel Type
LPG / Dual Fuel
Drivetrain
Transmission
Powershift
Steering
FHPS
Brakes
Brake System Type
Foot / Hydraulic
Parking Brake
Hand / Mechanical
Wheels & Tires
Tires, Front Specification
Type: Pneumatic | 6.5 - 10 - 10PR (I)
Tires, Rear Specification
Type: Pneumatic | 5 - 8 - 8PR (I)
Tire Tread Thickness, Front
35 in
Tire Tread Thickness, Rear
35.2 in
Wheels
Number of Wheels, Front/Rear: 2x / 2
Operational
Operating Speed
Lowering Speed, Loaded/Unloaded: 98.4 / 108.3 fpm | Travel Speed, Loaded/Unloaded: 11.5 / 11.8 mph | Lifting Speed, Loaded/Unloaded: 116 / 126 fpm
Operating Conditions
Maximum Gradeability: 39% | Maximum Drawbar Pull, Loaded: 3,700 lbs
Hydraulics
Maximum Pressure
2,650 psi
Dimensions
Dimensions
Load Distance From Center Axle (2 Stage): 15.4 in | Tilting Angle, Forward/Backward: 6 / 8 deg | Tilting Angle, 3-Stage: 6 / 5 deg | Forks, Thickness: 1.6 in | Right Angle Stacking Aisle: 92.4 in
Wheelbase
55.1 in
Turning Radius
Outside: 77 in
Ground Clearance
Under Mast: 5.5 in | Center of Wheelbase: 5.1 in
Overall Width
at Drive Tires: 42.1 in
Length
with Standard Forks: 129.7 in | to Fork Face: 87.6 in | 42.1 in
Width
3.9 in | Carriage Width/ITA Class: 41 in / II
Height
Mast Lowered: 85.5 in | Extended: 176 in | Free Lift: 5.5 in | Maximum Fork: 128 in | Overhead Guard: 81.5 in
Capacities
Fuel Capacity
tank: 10.6 US gal
Cargo Capacity
Capacity @ 24 in. (600mm) Load Center: 3,000 lbs
Axle Capacity, Front
Loaded: 7,770 lbs | Unloaded: 2,620 lbs
Axle Capacity, Rear
Loaded: 1,170 lbs | Unloaded: 3,320 lbs
Weights
Weight
Service: 5,940 lbs
Features
Features
Operation Type: Sit-Down