2024 Komatsu AM50 Series FB20AU-12

Information

2024 Komatsu AM50 Series FB20AU-12

Agile and powerful — indoors and out

Electric forklifts can be hindered by wet and corrosive environments, but the nimble yet powerful 3-wheeled AM50 takes rain, snow, and salt water in stride. Its battery-powered sustainability, low maintenance design and unsurpassed turning ability mean it’s perfect for outdoor jobs that previously only engine-powered models could handle.

Features may include:

Exceptional durability
  • Limit your downtime even in harsh conditions. The AM50 series forklifts meet IP-X4 water-resistant standards and offer airtight, wet disc brakes, AC motors that eliminate motor brush/contact checks or replacements, weather-resistant controls and more.
A braking system for all seasons
  • An airtight, wet disc brake system assures dependable braking in most working environments. Unlike conventional drum-and-shoe braking systems, Komatsu’s wet disc brake system can go up to 10,000 hours with little more than oil changes.
High performance from Total AC
  • Achieve high performance with minimal costs with an AC system that utilizes advanced AC drive motors and an AC hydraulic motor. The Total AC system’s AC motors provide high operating efficiency, long operating life and longer run times than conventional DC-type motors.
More power for higher productivity
  • When you need great performance in bad surface conditions. All-around Dual Drive means the two front wheels are driven by independent AC drive motors for power and speed comparable to that of an engine-powered truck.
Nimble controls for more precision
  • Efficiency and precision from controllers designed to be light, compact, and simple to use. The controller itself is reliability tested and housed in a compartment that resists dust, water and other contaminants.
Designed to IPX4 Standards
  • A forklift for coolers, freezers, the outdoors, and that can be safely washed down when needed. AM50 models are designed to meet IP-X4 water-resistant standards, down to the control micro-switches, potentiometers and control signal circuits.

Photos

Highlights

  • Chesapeake, Virginia
  • 2024
  • Komatsu
  • AM50 Series FB20AU-12
  • Available
  • Forks: 4.8 in | Carriage: 38.2 in
  • Mast Height - Lowered: 89 in | Mast Height - Extended: 168.1 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in

Specifications

  • 2024
  • Komatsu
  • AM50 Series
  • FB20AU-12
  • Cushion Tire
  • Power Type: Electric
  • Drive Motor (AC): 6.0 x 2 HP | Pump Motor (AC): 12.1 HP
  • Fully Hydrostatic Power Steering
  • Drive Motor Control: AC Inverter
  • Service Brake, Operation/Control: Foot / Hydraulic
  • Operation/Control: Hand / Mechanical
  • Type: Cushion | 18 x 8 x 12.13
  • Type: Cushion | 15 x 5 x 11.25
  • Number of Wheels, Front/Rear: 2x / 2 (dual)
  • 37.4 in
  • 6.7 in
  • Voltage: 48 V
  • 600 Ah/6hr
  • Operation Type: Sit-Down | Maximum Gradeability: 14%
  • Travel Speed, Loaded/Unloaded: 9.0 / 10.0 mph | Lifting Speed, Loaded/Unloaded: 55.1 / 98.4 fpm | Lowering Speed, Loaded/Unloaded: 72.8 / 86.6 fpm
  • Relief Pressure - Attachment: 2,300 psi
  • Load Distance From Center Axle (2 Stage): 17.7 in | Tilting Angle, Forward/Backward: 6 / 10 deg | Forks, Thickness: 1.4 in | Right Angle Stacking Aisle: 127.4 in / 132.4 in
  • 58.5 in
  • Mast Height - Lowered: 89 in | Mast Height - Extended: 168.1 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in
  • Free: 6.7 in
  • with Standard Forks: 125.4 in | to Fork Face: 83.3 in | Forks: 42.1 in
  • at Drive Tires: 45.8 in
  • Forks: 4.8 in | Carriage: 38.2 in
  • Under Mast: 3.7 in | Center of Wheelbase: 4.9 in
  • 66.5 in
  • @ 24 in (600 mm) Load Center: 4,000 lbs.
  • Axle Loading - Loaded Front: 11,070 lbs. | Axle Loading - Unloaded Front: 4,190 lbs.
  • Axle Loading - Loaded Rear: 1,530 lbs. | Axle Loading - Unloaded Rear: 4,410 lbs.
  • Maximum Drawbar Pull, Loaded: 2,040 lbs.
  • Oil: 6.1 US gal
  • Service: 8,600 lbs. | Minimum Battery: 1,680 lbs. | Maximum Battery: 2,100 lbs.
  • Carriage ITA Class: II